Sony Cyber-shot DSC-W30 User Manual page 83

Smart zoom does not function.
Set [Digital Zoom] to [Smart] (page 47).
•
This function cannot be used when:
•
The image size is set to [6M] or [3:2].
–
Shooting in Multi Burst mode.
–
Shooting movies.
–
The flash does not work.
The flash is set to
•
You cannot use the flash when:
•
[Mode] (REC Mode) is set to [Burst] or [Multi Burst] (page 36).
–
(High sensitivity mode) or
–
When the mode dial is set to
–
Set the flash to
•
(Beach mode) is selected in the Scene Selection.
Fuzzy specks appear in images shot using the flash.
Dust in the air reflected the flash light and appeared in the image. This is not a malfunction.
•
The close-up (Macro) function does not work.
(Twilight mode) or
•
The date and time are not displayed.
While shooting, the date and time are not displayed. Only during playback, the date and time
•
are displayed.
The date and time are recorded incorrectly.
Set the correct date and time (
•
The F value and shutter speed flash when you press and hold the shutter
button halfway down.
The exposure is incorrect. Correct the exposure (
•
The image is too dark.
You are shooting a subject with a light source behind the subject. Select the metering mode
•
(page 34) or adjust the exposure (
When the brightness of the screen is too low, adjust the brightness of the LCD backlight
•
(DSC-W50 only) (page 23,
Turn on the screen (page 23).
•
(Flash forced off) (
t
(Twilight mode) is selected in the Scene Selection.
.
(Flash forced on) when
(Landscape mode) is selected in the Scene Selection (page 29).
step 2 in "Read This First").
t
step5 in "Read This First").
t
step5 in "Read This First").
t
step 5 in "Read This First").
(Landscape mode),
step5 in "Read This First" ).
t
(Snow mode) or
83