Pipe/Connection Requirements; Electrical Connection Requirements; Operating Precautions - Sullair RH Series User & Service Manual

PRODUCT USER MANUAL
3.13 PIPE/CONNECTION
REQUIREMENTS
Refer to Product Models and Specifications—
Table 3-2, Table 3-3, Table 3-4, Table 3-5.
3.14 ELECTRICAL CONNECTION
REQUIREMENTS
The owner shall furnish all labor, materials,
equipment and services
reasonabaly incidental to complete the installation of
all electrical as shown on the drawings.
The electrical installation and connection shall be
made in strict accordance with the requirements of
any and all City, County, State or Federal codes of
Law having jurisdiction, the requirements and
recommendations of the Board of Fire Underwriters,
including all amendments and / or additions to the
said codes, laws,
recommendations, the
recommendations of the local utility, the Owner, and
the Standard Building Code.
The installer shall obtain all permits and inspections
required for the work, and shall pay all costs and fees
thereof.
46
Figure 3-1: Typical Installation Diagram
necessary for and
requirements, and
requirements and

3.15 OPERATING PRECAUTIONS

WARNING
Verify that the operating parameters match
with the nominal values stated on the data
nameplate of the dryer (voltage, frequency,
air pressure, air temperature, ambient tem-
perature, etc.).
This dryer has been thoroughly tested, packaged
and inspected prior to shipment. Nevertheless, the
unit could be damaged during transportation, check
the integrity of the dryer during first start-up and
monitor operation during the first hours of operation
Qualified personnel must perform the first start-up.
When installing and operating this equipment,
comply with all National Electrical Code and any
applicable federal, state and local codes.
Who is operating the unit is responsible for the
proper and safe operation of the dryer.
Never operate equipment with panels removed.
SECTION 3