Troubleshooting
Battery pack and power
Cannot insert the battery pack.
•
Insert the battery pack correctly to push the battery eject lever.
Cannot turn on the camera.
After inserting the battery pack into the camera, it may take a few moments for the camera to
•
power up.
Insert the battery pack correctly.
•
The battery pack is discharged. Insert a charged battery pack.
•
The battery pack is dead (page 122). Replace it with a new one.
•
Use a recommended battery pack.
•
The power turns off suddenly.
If you do not operate the camera for about three minutes while the power is on, the camera
•
turns off automatically to prevent wearing down the battery pack. Turn on the camera again.
The battery pack is dead (page 122). Replace it with a new one.
•
The remaining charge indicator is incorrect.
This phenomenon occurs when you use the camera in an extremely hot or cold location.
•
A discrepancy arose between the remaining charge indicator and the actual remaining battery
•
charge. Fully discharge the battery pack once, then charge it to correct the indication.
•
The battery pack is discharged. Insert a charged battery pack.
The battery pack is dead (page 122). Replace it with a new one.
•
Cannot charge the battery pack.
You cannot charge the battery pack using the AC Adaptor (not supplied). Use the battery
•
charger to charge the battery.
105