Internal Memory; Printing; Pictbridge Compliant Printer - Sony Cyber-shot 4-130-938-12(1) Handbook

Internal memory

Cannot playback or record images using the internal memory.
• There is a "Memory Stick Duo" media inserted in the camera. Remove it.
Cannot copy the data stored in the internal memory to a "Memory Stick Duo"
media.
• The "Memory Stick Duo" media is full. Copy to a "Memory Stick Duo" media with sufficient
capacity.
Cannot copy the data on the "Memory Stick Duo" media or the computer to the
internal memory.
• This feature is not available.

Printing

See "PictBridge compliant printer" together with the following items.
Images are printed with both edges cut off.
• Depending on your printer, all the edges of the image may be cut off. Especially when you print an
image shot with the image size set to [16:9], the lateral end of the image may be cut off.
• When printing images using your printer, cancel the trimming or borderless settings. Consult the
printer manufacturer as to whether the printer provides these functions or not.
• When having images printed at a digital print shop, ask the shop whether they can print the images
without cutting off both edges.
Cannot print images with the date.
• Using "PMB", you can print images with date (page 133).
• The camera does not have a feature for superimposing dates on images. However, because the images
shot with the camera include information on the recording date, you can print images with the date
superimposed if the printer or the software can recognize Exif information. For compatibility with
Exif information, consult the manufacturer of the printer or the software.
• If you use a photo printing service, ask them to superimpose the dates on images.

PictBridge compliant printer

A connection cannot be established.
• The camera cannot be connected directly to a printer that is not compliant with the PictBridge
standard. Consult the printer manufacturer as to whether the printer is compliant with PictBridge or
not.
• Check that the printer is turned on and can be connected to the camera.
• Set [USB Connect] to [PictBridge] (page 70).
• Disconnect the USB Cable (DSC-T900) or the cable for multi-use terminal (DSC-T90) and connect it
again. If an error message is indicated on the printer, refer to the operating instructions supplied with
the printer.
154 GB