Flash Level: Adjusting The Amount Of Flash Light; Red Eye Reduction: Setting The Red Eye Reduction Function - Sony Cyber-shot 3-700-727-12(1) Handbook

Shooting menu

Flash Level: Adjusting the amount of flash light

Adjusts the amount of flash light.
(–)
(Normal)
(+)
• To change flash mode, see page 28.
• Sometimes effects do not show up when the subject being shot is too bright or too dark.

Red Eye Reduction: Setting the Red Eye Reduction function

(Auto)
(On)
(Off)
• To avoid blurring of images, hold the camera firmly until the shutter is released. It usually takes a second
after you press the shutter button. Be also sure not to allow the subject to move during this period.
• Red Eye Reduction may not produce the desired effects. It depends on individual differences and
conditions, such as distance to the subject, or if the subject looked away from the pre-strobe. In such a
case, you can correct the red-eye using
• If you do not use the Face Detection function, Red Eye Reduction does not work, even when you select [Auto].
• This setting is not available depending on the Scene Selection mode (page 43).
For details on the operation 1 page 38
Toward –: Makes the flash level lower.
Toward +: Makes the flash level higher.
The flash strobes two or more times before
shooting to reduce the red-eye phenomenon when
using the flash.
When the Face Detection function is activated, the flash
strobes automatically to reduce the red-eye phenomenon.
The flash always strobes to reduce the red-eye phenomenon.
Does not use Red Eye Reduction.
(Retouch) in the viewing menu after shooting (page 58).
55