Sony CD MAVICA MVC-CD300 Operating Instructions Manual page 98

Cd mavica digital still camera
Hide thumbs Also See for CD MAVICA MVC-CD300:
Table of Contents

Advertisement

5
Open "Device Manager" on Windows.
For Windows 98, Windows 98SE and Windows Me users:
Open [Control Panel] from [
1
"System properties" is displayed. Click the [Device Manager] tab located at
2
the top.
Click [
CD Mavica] in [
3
button located at the lower-right corner.
For Windows 2000 Professional users:
* Log in with the permission of administrator.
Open [Control Panel] from [
1
"System properties" is displayed. Click the [Hardware] tab located at the top,
2
then click the [Device Manager (D)] button.
Click [View] in [Device Manager], then click [Devices by type (E)].
3
Right-click [
4
6
After the message appears to verify that you delete the device
manager, click "OK."
7
Turn off the camera, disconnect the USB cable, and restart the
computer.
8
Install the USB driver in the supplied CD-ROM to the computer
following the procedure on page 38.
Battery packs
Symptom
The battery pack cannot
be charged.
The battery life is short.
98
My Computer], then double-click [System].
Other devices], then click the [Delete (E)]
My Computer], then double-click [System].
CD Mavica] in [
Cause and/or Solution
• The power of the camera is turned on.
t
Turn off the power of the camera (page 10).
• You are recording/playing back images under
extremely cold temperatures.
• The battery pack is not charged enough.
t
Charge the battery pack fully.
• The battery pack is dead.
t
Replace the battery pack with a new one.
Other devices], then click [Delete (E)].

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cd300Mvc-cd200Mvccd300 - 3mp digital camera

Table of Contents