Sony CD MAVICA MVC-CD300 Operating Instructions Manual page 39

Connect the USB jack on your camera with the USB connector on
7
your computer using the supplied USB cable.
computer
The computer automatically recognizes the camera.
8
Open [ My Computer], the newly recognized drive (Example: (E:)) is added.
Installing driver is complete.
Insert the disc into the camera, connect the AC power adaptor to
9
the camera, then turn on the power of the camera.
Go to "Viewing images" below. If you remove the disc without viewing an
image, be sure to read "Before disconnecting the USB cable" on page 40.
Viewing images
When you view images on the disc which was not finalized, you have to install
DirectCD included in the supplied CD-ROM. For details on DirectCD, refer to the
software operating instructions of DirectCD.
E.g., for Windows Me users
Turn on your computer and allow Windows to load.
1
Connect the USB jack on your camera with the USB connector on
2
your computer using the supplied USB cable.
computer
Insert the disc into the camera, connect the AC power adaptor to
3
the camera, then turn on the power of the camera.
"USB MODE" appears on the LCD screen of the camera.
to the USB connector
to the USB connector
to the USB jack
Push the
USB
connector as far
cable
as it will go
to the USB jack
Push the
USB
connector as far
cable
as it will go
39