Overview - Sony CCU-TX50 Operating Instructions Manual

Overview

The CCU-TX50/50P is a camera control unit that
connects to DXC-D50 Series Color Video Cameras via
the CA-TX50/50P Camera Adaptor.
Features of this unit are described below.
Full-featured signal transfer functions
• The CCU-TX50/50P is able to transfer wide band
component video signals.
• The maximum triaxial cable length that can be used to
connect this unit to a camera adaptor is max. 750 m
(when using a Belden φ8.5 mm cable) or 1125 m
(when using a Belden φ13.2 mm cable).
• Transfer functions are provided for the following
signals.
Return video, teleprompter signal, microphone audio,
program audio, red tally and green tally signals
• An intercom system is also provided.
Flexibly adaptable camera control functions
• The camera control panel mounted on the front panel
of the unit enables video camera operations to be
controlled from the unit.
• When the RCP-D50 remote control panel is connected
to the rear panel of the unit, the video camera
operation can be controlled from both the remote
control panel and the front panel of the unit.
Wide array of input/output signals
The input and output connectors provided for the CCU-
TX50/50P include those for outputting such signals as a
composite video signal (VBS), component video signals
(switchable to RGB), SDI signals, and video signals for
video and waveform monitors, for inputting a reference
signal for external synchronization.
Status and self-diagnostics display on the
picture monitor
You can check all sorts of settings of the unit and the
results of self-diagnoses of internal boards on the
monitor connected to the PIX connector on the rear
panel.
Rack mountable
Two CCU-TX50/50P units can be installed side by side
in the optional RMM-301 Rack Mount Bracket.
4
Overview