Screen Lock Settings - Kyocera DuraForce PRO 2 User Manual

► From the Home screen, tap
IMPORTANT: Highest security level protection (password protection) and frequent change of
password are recommended to protect your phone and data from unauthorized
access.
NOTE: When you change the screen lock option, you may be asked to choose how you want
notifications to show on the lock screen depending on the previous screen lock option.
In that case, follow the onscreen instructions.
▪
None: There is no security.
▪
Swipe: There is no security using the Swipe option.
▪
Pattern: There is Medium security using the Pattern. Follow the onscreen instructions
to set.
▪
PIN: There is Medium to high security using the 4-digit number. Follow the onscreen
instructions to set.
▪
Password: There is High security using password. Follow the onscreen instructions
to set.
▪
Fingerprint: There is Medium security using the Fingerprint. See
▪
Tap displayed near Screen lock to configure the screen lock settings.

Screen lock settings

You can increase the security of your phone by creating a screen lock.
NOTE: The available Screen lock settings may vary depending on the screen lock option you
have selected.
►
From the Home screen, tap
lock.
Make pattern visible
You can hide the trace of your pattern as you draw it. This setting appears only when you set
Screen lock type to Pattern.
Automatically lock
Sets the time delay to activate the screen lock feature after the device enters sleep mode. This
setting is available only when you have enabled one of the lock settings.
Power button instantly locks
Activates the screen lock feature by pressing the Power button. This setting appears only when
you set one of the lock settings.
> Settings > Security & location > Screen lock.
> Settings > Security & location >
86
Fingerprint to set.
next to Screen
Settings