Installer’s Guide; Tayplus103A Heat Pump Dual Fuel Kit; Unrestricted Mode; Restricted Mode - Trane TAYPLUS103A Installer's Manual

Installer's Guide
Trane
A business of
American Standard Companies
For more information contact
your local dealer (distributor)

TAYPLUS103A Heat Pump Dual Fuel Kit

UNRESTRICTED MODE

*RESTRICTED MODE

Literature Order Number
File Number
Supersedes
Stocking Location
Since the manufacturer has a policy of continuous product and product data improvement, it reserves the right
to change design and specifications without notice.
NOTES:
1. POWER SUPPLY AND GROUNDING OF EQUIPMENT MUST COMPLY
WITH LOCAL CODES.
2. BE SURE POWER SUPPLY AGREES WITH EQUIPMENT NAMEPLATE.
3. LOW VOLTAGE (24 V.A.C.) MUST BE NO. 18 AWG MIN.
4. THIS LEAD REQUIRED ONLY IF FURNACE NEEDS "Y" TO DELIVER
FULL COOLING AIRFLOW.
5. MAKE THIS JUMPER CONNECTION ONLY IF THE FURNACE NEEDS
FAN ENABLE SIGNAL FOR HEATING OPERATION.
6. THIS JUMPER REQUIRED ONLY FOR 2 STAGE FURNACES.
7. BONNET THERMOSTAT MODEL THT1248 REQUIRED FOR OIL
FURNACE APPLICATIONS.
NOTES:
1. POWER SUPPLY AND GROUNDING OF EQUIPMENT MUST COMPLY
WITH LOCAL CODES.
2. BE SURE POWER SUPPLY AGREES WITH EQUIPMENT NAMEPLATE.
3. LOW VOLTAGE (24 V.A.C.) MUST BE NO. 18 AWG MIN.
4. THIS LEAD REQUIRED ONLY IF FURNACE NEEDS "Y" TO DELIVER FULL
COOLING AIRFLOW.
5. MAKE THIS JUMPER CONNECTION ONLY IF THE FURNACE NEEDS FAN
ENABLE SIGNAL FOR HEATING OPERATION.
6. THIS JUMPER REQUIRED ONLY FOR 2 STAGE FURNACES.
7. BONNET THERMOSTAT MODEL THT1248 REQUIRED FOR OIL FURNACE
APPLICATIONS.
8. TO LOCK OUT GAS FURNACE AT OUTDOOR TEMPERATURES ABOVE
ODT SET POINT, DO NOT CONNECT WIRE TO THERMOSTAT TERMINAL
"W" AND TERMINAL "I" ON ODT.
PLUS-IN-1C
SV-UN-ACC-PLUS-IN-1C 09/03
PLUS-IN-1B
PI Louisville P.I.