Sony Trinitron KV-XA25 Operating Instructions Manual page 16

Enjoying stereo or bilingual programs (continued)
When receiving an A2 program
Receiving area for NICAM and A2 programs
If the sound is distorted when receiving a monaural program
through the 8 (antenna) terminal
16
Advanced Operations
Broadcasting
A2 stereo
A2 bilingual
System Receiving area
NICAM Hong Kong, Singapore, New Zealand, Malaysia,
Thailand, etc.
A2 Australia, Malaysia, Thailand, etc.
Notes
• If the signal is very weak, the sound becomes monaural automatically.
• If the stereo sound is noisy when receiving a NICAM program, select
"MONO". The sound becomes monaural, but the noise is reduced.
Press A/B repeatedly until "MONO" appears on the screen.
To cancel the monaural sound setting, press A/B again until
"AUTO" appears on the screen.
MONO
Notes
• The "MONO" or "AUTO" setting is memorized for each program
number.
• You cannot receive stereo broadcast signal when the TV is in the "MONO"
setting. Normally set the TV to "AUTO".
On-screen display (Selected sound)
MONO
(Regular sound)
MAIN
(Main sound)
AUTO
STEREO
(Stereo sound)
SUB
(Sub sound)