KTM 250 SX 2019 Owner's Manual page 74

11 SERVICE WORK ON THE CHASSIS
72
Warning
Danger of poisoning Fuel is poisonous and a health hazard.
–
Avoid skin, eye and clothing contact with fuel.
–
Immediately consult a doctor if you swallow fuel.
–
Do not inhale fuel vapors.
–
In case of skin contact, rinse the affected area with plenty of water.
–
Rinse the eyes thoroughly with water, and consult a doctor in case of fuel contact with the eyes.
–
Change your clothing in case of fuel spills on them.
K01191-02
K01190-11
K01221-11
K01189-11
Main work
–
Check the throttle cable routing. (
–
Position the fuel tank and fit the two spoilers to the sides of
the radiator bracket.
–
Make sure that no cables or throttle cables are trapped or dam-
aged.
(All SX models)
–
Mount the fuel tank breather hose.
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
(All XC models)
–
Mount the fuel tank breather hose.
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
–
Connect the fuel hose.
p. 78)
1
with the rubber bushing.
M6 10 Nm (7.4 lbf ft)
1
with the rubber bushing.
M6 10 Nm (7.4 lbf ft)
2
.
M6 10 Nm (7.4 lbf ft)