KTM 250 SX 2019 Owner's Manual page 105

Main work
–
Check the battery voltage.
» Battery voltage: < 9 V
–
Do not charge the battery.
–
Replace the battery and dispose of the old battery
properly.
» If the specifications have been met:
Battery voltage: ≥ 9 V
–
Recharge the battery.
S00863-10
Guideline
The charging current, charging voltage, and charging
duration must not be exceeded.
Maximum charging volt-
age
Maximum charging cur-
rent
Maximum charging time
Charge the battery regu-
larly when the motorcy-
cle is not in use
(US) battery charger (79629974500)
Alternative 1
(EU) battery charger (79629974000)
These battery chargers test whether the battery retains
its voltage. It is also impossible to overcharge the bat-
tery with these battery chargers. The charging time may
be longer at low temperatures.
These battery chargers are only suitable for lithium iron
phosphate batteries. Read the accompanying KTM Pow-
erParts instructions.
–
Switch off the battery charger after charging and disconnect
from the battery.
Finishing work
–
Install the battery.
–
Mount the seat. (
ELECTRICAL SYSTEM 14
14.4 V
3.0 A
24 h
6 months
Info
1
Never remove cover .
( p. 101)
p. 64)
103