Connecting Two Vcrs For Tape Editing - Sony KV-36FS12 Operating Instructions Manual

Connecting Two VCRs for Tape Editing

VCR (playback)
This connection applies to all models except KV-36FS12 and 36FS16.
If you connect two VCRs, you can use the TV's MONITOR OUT
feature to perform tape-to-tape editing. In the connection shown
below, the TV functions as a monitor and sends the program being
played by the playback VCR to the recording VCR.
1
Connect the VCR intended for playback using the connection
instructions on page 10 of this manual.
2
Using A/V connectors, connect AUDIO and VIDEO IN on the
VCR intended for recording to MONITOR AUDIO and VIDEO
OUT on your TV.
You cannot record signals from equipment connected to the Y, P
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
A/V cable
To perform tape editing, set the TV to the video input intended for playback by pressing
the TV/VIDEO button on the remote control.
TV
A/V cable
Installing the TV
, P input.
B R
VCR (recording)
11