Cable For Cc-Link Ie Field Network - Mitsubishi Electric MR-J4-*B-RJ010 Series Instruction Manual

8. OPTIONS AND PERIPHERAL EQUIPMENT
No. Product name
5) STO cable MR-D05UDL3M-B
(Refer to "MR-J4-
_B(-RJ) Servo
Amplifier
Instruction Manual"
section 11.1.2.)
6) Short-circuit
connector
7) Shielded twisted
pair cable (Refer
to section 8.2.)

8.2 Cable for CC-Link IE Field Network

For the wiring of CC-Link IE Field Network, use the following wiring tools recommended by the CC-Link
Partner Association. The CC-Link IE controller network cable cannot be used for the CC-Link IE Field
Network.
A product example on the market is as follows. For the latest product information, contact the manufacturer.
Model
Shielded twisted pair cable (Category 5e)
The shielded twisted pair cable is not an option.
Item
Cable type Shielded twisted pair cable (Category 5e)
Standard
Connector Category 5e or more RJ-45 plug
Model
SC-E5EW(-L)
(Note)
Note. The SC-E5EW cable is for in-enclosure and indoor uses. The SC-E5EW-L cable is
for outdoor use.
Description
Connector set: 2069250-1
(TE Connectivity)
Description
One of the following standards must be met.
IEEE802.3 1000BASE-T
ANSI/TIA/EIA-568-B (Category 5e)
Manufacturer
Mitsubishi Electric System & Service
Co., Ltd.
8 - 4
Application
Connection
cable for
the CN8
connector
Supplied
with servo
amplifier
For CC-
Link IE
Field
Network
Contact
email: oss-ip@melsc.jp