Using The Shaver - Philips Norelco 6000 Series Manual

Using the shaver

2 Insert the small plug into the charging stand
connect the power plug to any 100V to
240V AC outlet. Use only the power cord
provided.
3 Put the shaver in the charging stand.
4 After charging, remove the power plug from
the wall outlet and pull the small plug out of
the charging stand.
Note: An adapter plug may be necessary for
cord usage in some foreign countries. Use an
attachment plug adapter of the proper
configuration for power outlet.
Always check the shaver and all accessories
before use. Do not use the shaver or any
accessory if it is damaged, as this may cause
injury. Always replace a damaged part with
one of the original type.
This symbol indicates that the shaver can be
used in the bath or shower.
- Use this shaver for its intended household
use as described in this manual.
- For hygienic reasons, the shaver should
only be used by one person.
- Trimming is easier when the skin and hair
are dry.
15
English