Easy Setup Using The Wps Button - Ricoh M 2700 Setup Manual

13. Press the [Escape] key.
14. Press the [ ] or [ ] key to select [WiFi Setup Wizard], and
then press the [OK] key.
2/3
Print List/Report
WiFi Setup Wizard
Network Settings
15. If you are requested to enter a password, enter the
password using the number keys, and then press the [OK]
key.
Setup Wizard are Locked
Enter Password
A password for accessing the [WiFi Setup Wizard] menu can be
specified in [Admin. Tools Lock] under [Admin. Tools] menu.
16. Press the [ ] or [ ] key to select SSID of the router (access
point) from the searched SSID list, and then press the [OK]
key.
17. Enter the encryption key using the number keys, and then
press the [OK] key.
Password
Key :
(8-63chars/64hex)
WPA2-PSK
• As the passphrase, you can enter either 8 to 63 ASCII characters
(0x20-0x7e) or 64 hexadecimal digits (0-9, A-F, a-f).
• For details about checking the encryption key, see "Checking the
SSID and Encryption key".
18. Press the [OK] key.
Are you sure to connect?
(OK/Back)
19. Check the result.
Connection has succeeded:
Connect succeed!
Connection has failed:
Connect failed!
• Check the configuration for the router (access point), and then
try the connection again.
Configuring the Wireless (Wi-Fi) settings is complete.
To use the printer driver, install the printer driver according
to the procedure on page 11 "Easy Setup Using the
CD-ROM" and select "Automatically configure the printer
network" on Step 6.
8
DZV157
DZV176
DZV158
DZV159
DSG355
DSG356

Easy Setup Using the WPS Button

● Make sure the Ethernet cable is not connected to the
machine.
● In Steps 16 to 18, configure each setting within two
minutes.
The following item is necessary to set up a Wireless
(Wi-Fi) connection.
● Router (access point)
1. Check that the router (access point) is working correctly.
2. Make sure the wireless LAN option is attached to the
machine.
For details, see page 6 "Attaching the wireless LAN option".
3. Press the [User Tools/Counter] key.
4. Press the [ ] or [ ] key to select [Network Settings], and
then press the [OK] key.
2/3
Print List/Report
Network Settings
Copier Features
5. If you are requested to enter a password, enter the
password using the number keys, and then press the [OK]
key.
Network Set. are Locked
Enter Password
A password for accessing the [Network Settings] menu can be
specified in [Admin. Tools Lock] under [Admin. Tools] menu.
6. Press the [ ] or [ ] key to select [WiFi], and then press the
[OK] key.
Network Settings
1/2
Ethernet
WiFi
IPv4 Configuration
7. Check [WiFi Enable] is selected, and then press the [OK]
key.
WiFi
WiFi Enable
8. Press the [ ] or [ ] key to select [Enable], and then press
the [OK] key.
WiFi Enable
Disable
Enable
9. Turn off the machine and then turn on.
10. Repeat Steps 3 to 5.
DZV451
DZV150
DZV151
DZV152
DZV153
DZV154