Satellite Receiver - Sony KD-34XBR970 Operating Instructions Manual

Satellite Receiver

Using
S VIDEO jacks?
See page 7.
TV
Notes on Using This Connection
To Do This ...
Watch the satellite receiver
Set up the TV remote control to operate the
satellite receiver
Activate the TV remote control to operate
the satellite receiver
Control satellite receiver functions with the
TV remote control
Label video inputs to easily identify
equipment connected to the TV
To connect a satellite receiver
1
Connect the satellite antenna cable to the satellite receiver's
satellite input jack.
2
Use an A/V cable to connect the satellite receiver's A/V output
jacks to the TV's A/V input jacks.
3
Connect a CATV cable from your cable or antenna to the TV's
CABLE jack.
4
Run Auto Program, as described in "Setting Up the Channel List"
on page 20.
DIGITAL DIGITAL
AUDIO AUDIO
OUT OUT
PCM/ PCM/
DOLBY DIGIT DOLBY DIGITAL AL
A/V cable
Do This ...
Press
(VIDEO 1 in the illustration).
If you have a non-Sony satellite receiver, you must program
the remote control. See "Programming the Remote Control"
on pages 24-25.
Press
See "Operating a Satellite Receiver" on page 26.
See the instructions for setting up Video Labels on page 45.
CATV cable/antenna
Satellite receiver
TV/VIDEO
repeatedly to select the satellite receiver input
SAT/CABLE FUNCTION.
Satellite antenna
cable
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
11