Multi Picture In Picture (Multi Pip); Picture And Picture (Pap) - Sony FD Trinitron WEGA KV-29FQ76 Kж Operating Instructions Manual

29FQ76 B5 Part 3 GB.fm Page 11 Tuesday, May 7, 2002 11:54 AM
Multi Picture In Picture ( Multi PIP)
This feature displays 13 different channels simultaneously on screen. From this display you can
select which channel you wish to view.
7 8 9
1.
Press the
0
2. Press the PROG +/- buttons repeatedly to select the next or preceding 12 channels.
3. Press the V, v, B, or b buttons to move around the 13 displayed channels.
4.
Press the OK button to select the framed channel. This channel now moves to the centre.
5. Press the OK button again to view the selected channel or press the
PIP mode.

Picture And Picture (PAP)

This feature divides the screen in two for watching two channels simultaneously. The sound of the
left screen comes through the TV loudspeakers while the sound from the right screen is selectable
via headphones.
1. Press the
MODE
1 2 3
4 5 6
7 8 9
0
2.
Refer to the table below for explanations of each option.
3.
Press the
Option
Selecting sound for
the headphones
Changing the channel
of the left screen
Changing the channel
of the right screen
Swapping screens
Zooming the screens
button to enter Multi PIP mode.
02 03 04 05
04
13 01 06
12 12
07
11 10 09 09 08
button to enter PAP mode.
button to exit PAP mode.
With the TV in PAP mode set the 'iDual Sound' feature to 'PAP' (Refer to 'Sound
Adjustment menu' section for more information.)
Press the numbered buttons or PROG +/- buttons to select the required channel.
Alternatively, press the / button to view pictures from equipment connected to the
AV sockets of the TV.
Press the V button. The V symbol appears in the right screen. Press the numbered
buttons or PROG +/- buttons to select the required channel. Alternatively, press the
/ button to view pictures from equipment connected to the AV sockets of the TV.
Press the button to swap the screens.
Press the B or b buttons to change the size of the two screens.
02 03 04 04 05
01
13 06
12 12
07
11 10 09 09 08
button to exit Multi
How to use
Basic Operation 11