Tempo; Record And Playback - thomann Ohitman HD-17 Mako User Manual

Resetting the metronome to factory
defaults

9.6 Tempo

Changing the tempo

9.7 Record and playback

Record
Playback
3. Press [Enter] and use [+] or [–] to select one of the metronome sounds. Confirm
the selection with [Enter].
1. Simultaneously press [Tempo/Tap] and [Click] to call up the menu for editing
the metronome.
2. Press [+] or [–] repeatedly until the display shows 'REST' .
3. Press [Enter].
ð The display shows 'END' . The values for the metronome are reset to fac‐
tory settings.
There are two ways you can change the tempo using the [Tempo/Tap] button.
1.
Press [Tempo/Tap]. The display shows the currently set tempo.
2.
Press [+] or [–] repeatedly until the desired value is shown (display shows '020'
to '240' .
or:
3.
Press [Tempo/Tap]. The display shows the currently set tempo.
4.
Press [Enter]. The value of the currently set tempo is shown briefly in the dis‐
play.
5. Rhythmically hit a pad four times to change the tempo. The new value is deter‐
mined by the time interval between the four hits.
6.
To reset the tempo to factory settings, simultaneously press [+] and [–].
1.
Press [Rec/Play] and press [+] or [–] until the display shows 'RECD' .
2.
Press [Start / Stop] to start recording. Press [Start / Stop] again to stop recording.
1.
Press [Rec/Play] and press [+] or [–] until the display shows 'PLAY' .
2.
Press [Start / Stop] to start playback. Press [Start / Stop] again to stop playback.
HD-17 Mako
Operating
27