Heat Shift; Safety Shut-Off; Overheating Protection - Thermador PRD364WIGU Use And Care Manual

Heat shift

Heat Shift is a presetting of the Bridge. The location of
where the pot is placed (Front | Middle | Back) dictates the
heat setting (Max | Med | Min), respectively.
As an example, when the cookware is at the front of the
induction unit, the heat level will be at a high heat setting.
By shifting the cookware all the way back, it will change
automatically to a low setting without the need to reset
the control knobs.
Preset heat settings:
Front area = heat setting Š
Middle area = heat setting †
Rear area = heat setting ‚
Only use one item of cookware. The size of the cooking
area depends on the cookware used and whether it is
positioned correctly.
Activating heat shift
1. Place the pan at a desired
location on the induction
module.
2. Turn the Zone 1 knob to
-- The indicator will appear
in the display panel.
.

Safety shut-off

For your protection, the induction module has a safety
shut-off feature. Depending on the set power level, if a
heating zone is left on for an extended period of time
without any change in the temperature setting, it is
automatically shut off.
Power level
1 to 6
7
8 and 9
®
PowerBoost , XHI, function
An audible signal indicates when the duration has
elapsed. The Hot Surface indicator on the touch display
flashes.
To reset the automatic safety shut-off:
1. Turn the knob to OFF to reset. The induction module
can then be turned back on.

Overheating protection

In the event of overheating, the induction module
automatically regulates itself to protect the electronic
components.
Slight overheating
The induction module reduces the heat level. Once the
cooking zone has cooled down sufficiently, the selected
heat level is automatically reactivated. An acoustic signal
indicates that all heat levels are available again.
Severe overheating
The cooking zone is turned off automatically. An acoustic
signal sounds. Error message •or "... appears on the timer
display. The light above the control knob blinks rapidly.
1. Remove the cookware from the cooking zone.
-- If the error message goes out and a signal sounds,
the cooking zone has cooled down sufficiently.
2. Set control knob to OFF. Then set the desired heat
level as usual.
Shuts OFF after...
3 hours
2 hours
1 hour
10 minutes
Page. 8