Manual Programme Preset - Sony FD Trinitron KV-29CL10K Instruction Manual

Level 1
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset

Manual Programme Preset

Detail Set Up
a)
Preset channels or a video input source one by one to the programme order of your choice.
To do this:
1 After selecting the "Manual Programme Preset" option, press
option highlighted press
want to preset the channel (for VCR, select programme number "0"). Then press
2 The following option is only available depending on the country you have selected
in the "Language/Country" menu.
After selecting the System option, press
Broadcast system (B/G for western European countries or D/K for eastern European
countries). Then press
3 After selecting the Channel option, press
tuning ("C" for terrestrial channels or "S" for cable channels). Next press
press the number buttons to enter directly the channel number of the TV Broadcast or the
channel of the VCR signal. If you do not know the channel number, press
search for it. When you have tuned the desired channel, press OK twice to store.
Repeat all the above steps to tune and store more channels.
b)
Label a channel using up to five characters.
To do this: Highlighting the Programme option, press the PROGR +/- button to select the
programme number with the channel you wish to name. When the programme you want to
name appears on the screen, select the Label option and press
select a letter, number or "-" for a blank. Press
four characters in the same way. After selecting all the characters, press OK twice to store.
c)
Normally the automatic fine tuning (AFT) is operating, however you can manually fine tune
the TV to obtain a better picture reception in the case that the picture is distorted.
To do this: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT
option and press
Finally press OK twice to store.
d)
Skip any unwanted programme numbers when they are selected with the PROGR +/-
buttons.
To do this: Highlighting the Programme option, press the PROGR +/- button to select the
programme number you want to skip. When the programme you want to skip appears on
the screen, select the Skip option and press
press OK twice to confirm and store.
To cancel this function afterwards, select "No" instead of "Yes" in the step above.
e)
View and record correctly scrambled channels when using a decoder connected directly to
:
the Scart 2/
This option is only available depending on the country you have selected in the "Language/
Country" menu.
To do this: select the Decoder option and press
press OK twice to confirm and store.
To cancel this function afterwards, select "Off" instead of "On" in the step above.
14
Menu System
Level 2
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
. Press
.
. Next press or
or through a VCR.
S
Level 3 / Function
MANUAL PROGRAMME PRESET
The "Manual Programme Preset" option in the
"Set Up" menu allows you to:
or to select on which programme number you
. Then press or
. Then press
to confirm this character. Select the other
to adjust the fine tuning between -15 and +15.
. Next press
. Next press
then with Programme
to select the TV
or to select the channel
. After that,
or
r
. Next press o
or to select Yes. Finally
or to select On. Finally
continued...
.
to
to