2-1. Rear Cover Removal
=>
=>
Release the mains power cable from its securing posts.
Remove the rear cover fixing screws indicated. Pull the rear
cover away from the front beznet. Take care when removing
the rear cover not to damage the speaker cables as speakers
are fitted inside the rear cover.
2-3. Speaker Box Removal
To remove the speaker box pull forward in the direction of
the arrows while holding the rear cover. Ensure the weight is
supported as the box is pulled from its mountings.
SECTION 2
<=
<=
=>
=>
=>
DISASSEMBLY
2-2. Speaker Connector Disconnection
Before completely removing the rear cover disconnect the
speaker connectors which are located on the inside base of
the beznet.
2-4. Speaker Box Disassembly
To gain access to the speaker remove the six screws and pull
the two halves of the speaker box apart.
12
3 Screws at rear of
Speaker Box
Screws