Make sure wall mount
screws are securely
installed onto the
wall or flat surface
mount holster
Figure 14c. Installing the Wall Mount Holster
26
AC/DC Power Supply Connection
Each repeater ships standard with an AC/DC
Slide the repeater
down into the wall
Power supply cord (P/N PMPN4002A)(9 feet
mount
long) that connects the repeater to a (110/120)/
(220/240) Vac source.
Note:
Installation Guide
The AC/DC power supply cable is not
suitable for outdoor use. Please refer to
"Operational Safety Guidelines" on page vi
for more details.