Installing And Connecting; Positioning The Device - Siemens SIMATIC Field PG M4 Getting Started

Installing and connecting

4.1

Positioning the device

The outer housing is made of Magnesium. If it comes into contact with open flame, there is
a risk of fire / spreading fire.
NOTICE
Always set the PG down on its underside, otherwise there is a risk that it will fall over and
damage sensitive components.
● Position the programming device to ensure comfortable operation and safety.
● Position the programming device with its bottom on a flat surface and at a comfortable
● Ensure that a power outlet is easily accessible near your workplace.
● Ensure that there is enough space for connecting peripherals.
● Do not obstruct any ventilation slots when you position the device.
● Open the display by sliding the latch in the direction of the arrow.
● Flip the display open and adjust it to a convenient viewing angle. The display can be
SIMATIC Field PG M4
Getting Started, 10/2012, A5E31347325-AA
WARNING
height and distance.
adjusted to any inclination angle between 0 and 150 .
o
4
13