Figure 34. Remove the I/O board
Remove the dc-in cable
Make sure the following FRUs (CRUs) have been removed:
"Remove the lower case" on page 31
"Remove the battery pack" on page 32
Step 1.
Remove 2 screws, then open the hinge and disconnect the cable.
Figure 35. Remove 2 screws and disconnect the cable
Screw specifications
M2.5 x 4.5
Step 2.
Use a prying tool to detach the dc-in cable from the upper case.
CAUTION:
Do not pull the cable directly.
Number of screws
2
.
Chapter 4
Removing a FRU or CRU
47