Remove The Acetate Tape; Remove The Dc-In Cable (For Dis) - Lenovo 16IAH7 Hardware Maintenance Manual

Remove the acetate tape

Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 28
Step 1. Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2. Peel off the acetate tape.
Figure 13. Peel off the acetate tape
Go to
https://support.lenovo.com/partslookup
part:
Acetate tape

Remove the DC-in cable (for DIS)

Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
"Remove the acetate tape" on page 34
Step 1. Peel off the mylar.
34
Hardware Maintenance Manual
to look up the Lenovo part number of the following replacement