User-Defined Programme - Taurus Z9 Assembly And Operating Instructions Manual

Profiles of pre-set training programmes:
P 01 Peak
P 04 Hill
P 07 Canyon
P 10 Mountain
4.4.3

User-defined programme

When you have chosen the user-defined programme, you can set
the resistance with the arrow buttons. Confirm your setting with
MODE.
Then you set a time and hold MODE for two seconds to confirm.
Press START/STOP to start the training.
P 02 Longitudinal Valley
P 05 Hill cli
P 08 Hill valley
P 11 High land valley
P 03 Valley
P 06 High land
P 09 Hills
P 12 Hig land longitudinal valley
Figure 8
21