Description
2.1
Field of application and features
2.1.1
Field of application
The FIDAMAT 6-E gas analyzer is used for quantitative determination of hydrocarbons. The
device can also be used for measuring corrosive and condensing gas mixtures.
The FIDAMAT 6 analyzer is intended for continuous operation. Frequent switching on and off
(e.g. daily) can negatively affect the service life of the ignition device and pilot light.
Benefits
The FIDAMAT 6-E gas analyzer is characterized by a wide range of possible applications:
Measurements are thus possible under the following conditions:
● In the presence of up to 100% water vapor
● In ultra-pure gas applications
● With high-boiling components (up to 200 °C)
● In the presence of corrosive gases (with preliminary filter)
The FIDAMAT 6-E exhibits the following:
● Extremely low cross-sensitivity to interfering gases
● A low consumption of combustion air
The device is also equipped with warning and fault messages, e.g. in case of the following:
● Combustion gas failure
● Extinguishing of the flame
● Malfunctions of pump and filter
FIDAMAT 6
Operating Instructions, 03/2018, A5E00222135-03
2
11