Figure 4-3 Sliv Installation Details - Siemens Maxum II PD PA AP Service Manual

Vaporization System
The vaporization tube is inserted with an aluminum sleeve and into the heater assembly. The
carrier gas is preheated by routing it along the outside of the heated vaporizer and then into
the vaporizer. The vaporization temperature can be set independently of the oven
temperature, and is set based on the sample composition.
Oven Interior View of
Figure 4-3
Maxum II Valves and Oven Components
Service Manual, 10/2018, A5E42019844001
SLIV Installation
SLIV Installation Details
Liquid Injection Valve
Heater Block Module
Oven Exterior View of
SLIV Installation
Valves
4.2 Liquid Injection Valve
Heater, Cartridge
100W
120V or 240V
Probe, Push-in Style
.188" OD X 1" Long
33