Table of Contents
Advertisement
Chock Wheels
Shift Lever in Park
Parking Switch Brake
Push: Set
Pull: Release
Set Parking Brake
Parking Brake Indicator Light
EMERGENCY RESPONSE
On arrival, emergency responders should follow
their standard operating procedures for vehicle
incidents. Emergencies involving the LS 600hL may
be handled like other vehicles except as
noted in these guidelines for Extrication, Fire,
Overhaul, Recovery, Spills, First Aid, and
Submersion.
WARNING:
• Never assume the LS 600hL is shut off simply
because it is silent.
• Always observe the instrument cluster for the
READY indicator status to verify whether the
vehicle is on or shut off. The vehicle is shut off
when the READY indicator is off.
• Failure to shut off the vehicle before emergency
response procedures are performed may result
in serious injury or death from the unintentional
deployment of the SRS or severe burns
and electric shock from the high voltage
electrical system.
Extrication
Immobilise Vehicle
•
Chock wheels and set the parking brake.
Move the shift lever to the Park position.
NOTE:
The LS 600hL utilises a push/pull parking brake
switch that electro-mechanically sets/releases
the rear parking brakes.
- To set/release, push/pull the parking brake
switch located on the dash to the left side of
the steering column (refer to illustration).
- If the AUTO button is set and illuminated, the
parking brake will automatically set when
the vehicle is shifted to the Park position.
- To verify that the parking brake is set,
confirm that the PARK light illuminates on
the instrument cluster (refer to illustration).
The PARK light will turn off after
approximately 15 seconds.
– 15 –
Advertisement
Table of Contents
