Install The Switch As Shipped; Installing The Cable Guide On The Chassis With L-Brackets Preinstalled On The Chassis - Cisco Catalyst 9600 Series Hardware Installation Manual

Install the Switch as Shipped

Install the Switch as Shipped

Installing the Cable Guide on the Chassis with L-Brackets Preinstalled on the
Chassis
Procedure
Step 1 Position the cable guides to align with the L-brackets preinstalled on the chassis and secure the cable guides
to the L-brackets using the screws provided.
Figure 7: Attaching the Cable Guides
1
Step 2
Secure the chassis to the rack rails with four screws on each side.
Cisco Catalyst 9600 Series Switches Hardware Installation Guide
30
Screws to attach the cable guides to the
L-brackets on the chassis
2 Cable guides
Installing the Switch