Sony PEG-N770C/E Operating Instructions Manual page 82

Using your CLIÉ handheld
To perform a HotSync
1 Rotate the Jog Dial™ to select HotSync
the Application Launcher screen.
The HotSync dialog box appears.
2 Tap Local.
3 Tap the arrow
list.
4 Point the IR port of your CLIÉ handheld directly at the IR port of the receiving computer.
For best results, your computer and your CLIÉ handheld should be 4 to 8 inches (approximately 10 to 20
centimeters) apart, and the path between your CLIÉ handheld and the computer must be clear of
obstacles.
5 Tap the
The HotSync
Restoring the local HotSync
To restore the local HotSync
1 Connect the cradle to your computer.
2 Click the HotSync
shortcut menu.
3 Click the HotSync
menu.
The Setup dialog box is displayed.
4 Click the Local tab to display the setting for a local HotSync
5 Click OK.
Your computer is now ready to perform a local HotSync
®
operation, proceed as follows:
beneath the HotSync
icon.
®
operation starts. Wait for the message showing that the HotSync
®
settings
®
settings, proceed as follows:
®
icon in the Windows
®
icon in the Windows
®
and then press the Jog Dial™. Or tap the HotSync
®
icon and then select IR to a PC/Handheld from the drop-down
®
system tray and deselect the check mark of Local from the
®
system tray again and then select Setup from the Shortcut
®
operation as needed.
®
operation.
n N
81
®
icon on
®
operation is complete.