Table of Contents
Advertisement
Using the Memory Stick™
Make sure you use your CLIÉ handheld to format a Memory Stick™ if you intend to use it with your CLIÉ handheld. If you use the computer to format
a Memory Stick™ for use with a CLIÉ handheld, some data may not be accessed correctly.
If you failed to initialise the Memory Stick™ as a result of pulling it out during initialisation, the Memory Stick™ is not recognised by your computer.
In this case, remove the Memory Stick™ and reinstall it.
Viewing Memory Stick™ information
Card Info gives you the outline (such as the remaining memory space) of the Memory Stick™ inserted into
your CLIÉ handheld. You can also give a name to each Memory Stick™ you use, which comes in handy when
you have more than one.
To view the information on the Memory Stick™, proceed as follows:
Rotate the Jog Dial™ to select Card Info and press the Jog Dial™.
Alternatively, tap the Card Info icon on the Application Launcher screen.
The Card Info screen appears, showing you the information you need.
Exchanging data with the Memory Stick™
The Memory Stick™ allows you to exchange data between your CLIÉ handheld and your computer or a
digital camera that supports Memory Stick™. To exchange data with the Memory Stick™, your CLIÉ uses the
pre-delivered Memory Stick™ Gate (MS Gate) software.
For more details, go to the Software Guide and read the section Exchanging data with the Memory
Stick™.
Backing up data with the Memory Stick™
With the Memory Stick™, you can save a back-up copy of the data on your CLIÉ handheld. To do this, you
can use the applications MS Backup or MS Gate.
For more information, go to the Software Guide and read the section Backing up data.
n N
101
Advertisement
Table of Contents
