How To Enable Gas Consumption Metering; How To Set Depth Notifications (Freedive Only) - Suunto D5 User Manual

Suunto D5
5. When you added the desired view(s), click Done.
6. Synchronize your device to save the customizations to your Suunto D5.
7. When you use the view in Suunto D5, press the lower button to cycle through these switch
windows.

4.9. How to enable gas consumption metering

When you customize your Suunto D5 in DM5 to include the gas consumption info field in the
switch window (see 3.8. Customizing with Suunto DM5, this information will always be
avalable and visible during a dive where you use the gas to which the Tank POD is attached.
TIP: Make sure the tank size is correct.
To enable gas consumption metering:
1. Add the gas consumption field to your custom dive mode in DM5. See 3.8. Customizing
with Suunto DM5.
2. Install and pair a Suunto Tank POD. See 3.29. Tank pressure.
3. After you have selected the correct gas and returned to the main time view, keep the
middle button pressed to enter menu.
4. Scroll to Gases with the lower button and select with the middle button.
5. Scroll to the gas you just selected from your Tank POD and select with the middle button.
6. Scroll to Tank size and select with the middle button.
7. Check the tank size and change the size with the upper or lower button as needed.
Confirm change with the middle button.
8. Keep the middle button pressed to exit the menu.
NOTE: For accurate gas consumption, you must define the tank size. Not defining the
tank size leads to incorrect gas consumption readings.

4.10. How to set depth notifications (freedive only)

You can define a surface notification and five independent depth notifications for freediving,
for example, to alert you to start free falling or mouth filling. Each notification has a defined
depth and can be turned on or off.
In Free Mode go to Main menu » Dive settings » NOTIFICATIONS.
With the upper or lower button select Surface notify or Depth notify 1, 2, 3, 4, or 5.
The notifications are off by default. To define depth notifications:
1. Turn the notifications on with the upper button.
2. Use the middle button to switch among the fields horizontally to select the alarm type and
the depth of the notification. You can select sound, vibration or both for the notification.
50