Installation And Operation; For Windows; Installing Usb Driver Software - Sony MSAC-US2 Operating Instructions Manual

BInstallation and Operation

For Windows

First, you must install the USB driver software in the package on the
personal computer you are using. Follow the procedure below to install
the USB driver software.

Installing USB driver software

Turn on the computer to start Windows.
At this stage, do not connect the unit to the personal computer yet. If any
applications are running, close them down.
– For Windows Me/XP –
You do not need to install the USB driver (SPVD-008 USB DRIVER) from
the CD-ROM supplied with the unit. The unit will work using the
standard Windows driver.
If you are using Windows XP, you must log on using administrator's
privileges.
Go on to page 11, [Installing Image Transfer and PIXELA
ImageMixer for Sony].
– For Windows 98/98SE/2000 –
At this stage, do not connect the unit to the personal computer yet. If any
applications are running, close them down.
If you are using Windows 2000, you must log on using administrator's
privileges.
1
Insert the USB driver software CD-ROM (SPVD-008 USB
DRIVER) into the CD-ROM drive.
If the title screen does not appear, follow the procedures given below.
1 Double-click "My Computer."
2 Double-click CD-ROM (ImageMixer [E:])*.
* The drive symbol [E:] may differ depending on your computer.
The title screen will appear after a short wait.
9-US