7. Press the OK button.
8. Use the
button to select the size of the loaded paper on the rear tray, then press the
OK button.
Note
• The
(asterisk) on the LCD indicates the current setting.
9. Use the
button to select the type of the loaded paper on the rear tray, then press the
OK button.
Follow the instructions of any messages displayed to register the paper information.
10. Pull out paper output tray (E) and extend paper output support (F).
Be sure to pull out the paper output tray before printing. If not, printing will not start.
11. Start Easy-PhotoPrint Editor.
For Windows:
The procedure below is for a computer running the Windows 10 operating system.
30