Ensemble S6: Gsm Network Services; At+Cnum Subscriber Number - Ericsson T39 At Command Reference

<coding>:

4.14 Ensemble S6: GSM Network Services

4.14.1 Commands
AT+CNUM
Description:
Execution command:
Execution command
response:
Test command:
Parameters:
<alphax>:
<numberx>:
<typex>:
<speed>:
<service>:
<itc>:
<aiur>
2
3
4
<coding>
0
4
8
Note: The value '0' only applies when no HSCSD call is active. In such case, all
parameter values will be '0'.
Subscriber Number
The command requests the subscriber number.
AT+CNUM
+CNUM: [<alpha1>],<number1>,<type1>[,<speed>,<service>[,<itc>]]<CR><LF>
[+CNUM: [<alpha2>],<number2>,<type2>[,<speed>,<service>[,<itc>]]<CR><LF>
[...]]
AT+CNUM=? Shows if the command is supported.
Alphanumeric string. Associated with <numberx>. The character set used is selected
with AT+CSCS.
String; phone number of format specified by <typex>.
String; type of address.
Integer; data rate.
<service>
0
4
5
<itc>
0
1
Description
Current air-interface user rate is 14400 bits/s
Current air-interface user rate is 19200 bits/s
Current air-interface user rate is 28800 bits/s
Description
No HSCSD call is active; see note below
Current channel coding is 9600 bits/s
Current channel coding is 14400 bits/s
Description
Asynchronous modem
Voice
Fax
Description
3.1 kHz
UDI
AT Commands Phone Terminal Terminated 45