Advertisement
TRACK/
ALARM
ALARM
ALARM
CLOCK
A
B
MODE
TIME SET/TRACK
POWER ON
OFF /
CD ·∏
RADIO/SLEEP
ALARM RESET
SNOOZE/SLEEP OFF
LIFT OPEN
Locating a Particular Portion
Locating a particular selection (AMS*)
Setting the Clock
To locate the beginning of the current selection,
press =.
Set the time when the CD or radio is turned off.
To locate the next selection, press +.
1.
Plug in the unit.
Locating a particular point in a selection
The display will flash "AM 12:00".
(SEARCH)
2.
While holding down TRACK/CLOCK,
To go back at high speed, keep = pressed.
press either TIME SET/TRACK + or –
To go ahead at high speed, keep + pressed.
until the correct time appears in the
* AMS is the abbreviation of Automatic Music
display.
Sensor.
When you release TRACK/CLOCK, the
• If you press = repeatedly, the player locates
clock begins to operate and ":" flashes.
the previous selections. If you press +
repeatedly, the player locates the next
• To set the current time rapidly, keep pressing
selections and stops at the last selection.
the + or – button while holding down TRACK/
• To stop play, press OFF/ALARM RESET.
CLOCK.
• To pause, press CD fl and the "CD ( "
• To set the current time from zero seconds, at
indication flashes. To resume play, press
step 2, release TRACK/CLOCK with the time
CD fl again.
signal.
• To change the clock mode to track mode, press
TRACK/CLOCK.
Press TRACK/CLOCK again, and the current
time appears.
Playing a Disc
• To eject a disc, lift LIFT OPEN.
• To handle compact discs
An 8 cm (3-inch) CD can be played without an
This way
adaptor.
1.
Lift LIFT OPEN to open the CD
compartment lid and place a disc.
Lift.
Not this way
Label surface up.
Close the lid.
Notes
• Do not open the CD compartment lid while
2.
playing, otherwise, the disc will be damaged.
Press CD fl and the display lights
Be sure to stop the disc first.
"01". The current number (01 to 99)
• When you press CD fl, if there is no disc in
appears in the display window. After
the CD compartment, the "00" indication
10 seconds, the indication becomes the
flashes for 10 seconds and the unit will be
current time, but the "CD ( "
turned off.
indication remains.
• If the
3.
listening to the CD, the track changes to that
Adjust VOLUME.
preset by pressing WAKE UP TRACK.
Playing the Radio
1.
Press RADIO/SLEEP to turn on the
radio.
The "RADIO" indication will appear
and the "On" indication will appear in
the display. After 10 seconds, the
indication becomes the current time but
WAKE UP
the "RADIO" indication remains.
TRACK
2.
Adjust VOLUME.
3.
Select the BAND.
4.
Tune in a station using the TUNING
dial.
• To turn off the radio, press OFF/ALARM
RESET.
• To improve radio reception
FM: Extend the FM wire antenna to improve
FM reception.
AM: Rotate the unit horizontally for optimum
reception. A ferrite bar antenna is built into the
unit.
Setting the Alarm
You can set the CD, radio and buzzer alarms at
VOLUME
the preset time. Before setting the alarm, be sure
to set the clock. (See "Setting the Clock".)
Setting the Alarm Time
AC power cord
To set the
1.
While holding down ALARM A, press
either TIME SET/TRACK + or – until the
desired time appears in the display
window.
FM wire antenna
The "
":" lights.
2.
Release ALARM A. The alarm time is
set and the indication becomes the
current time.
TUNING
3.
While holding down WAKE UP TRACK,
AM
FM
BAND
set the desired track by pressing = or
+ beside TIME SET/TRACK.
4.
Release WAKE UP TRACK. The track is
preset and the indication becomes the
current time.
Note
When the CD player is preset to start with track
5, it will always start with track 5 even though
you change the CD, unless you change WAKE
UP TRACK.
To set the
1.
While holding down ALARM B, press
either TIME SET/TRACK + or – until the
desired time appears in the display
window. The "
"
lights.
2.
Release ALARM B. The alarm time is
set and the indication becomes the
current time.
Setting the Alarm Mode
Before setting the alarm mode, be sure to set the
alarm time. (See "Setting the Alarm Time".)
1.
Press ALARM MODE until the alarm
you want appears in the display
window.
Each time you press ALARM MODE,
the alarm indication changes as follows.
No alarm
indication
Handle the disc
by its edge.
• To stop the alarm, press OFF/ALARM RESET.
The alarm will sound at the same time the next
day.
• To cancel the alarm, while holding down
ALARM MODE, press OFF/ALARM RESET.
• To check the alarm time you set, press ALARM
Do not touch the
A or ALARM B.
surface.
Notes
• The alarm does not function, unless you set the
Do not stick paper or
clock and
tape nor write
alarm.
anything on the
• If you set the CD alarm and radio or buzzer
surface.
alarm at the same time, the CD alarm sounds.
• When you set the CD alarm, if there is no disc
in the CD player, the buzzer will sound at the
time you set.
• The selected alarm is activated at the time you
set, and automatically turns off after 60
minutes.
• When the CD alarm comes on, the "
indication flashes.
If you want to stop flashing, press CD fl. The
alarm is activated while
CD player will stop playing at the last track.
• When the radio alarm is activated, the
"
" indication flashes. If you want to
keep on listening to radio and stop flashing,
press RADIO/SLEEP. The "
indication remains.
• The buzzer sound level is fixed, and
independent of VOLUME.
To Doze for a Few More Minutes
1.
Press SNOOZE/SLEEP OFF. The CD,
radio or buzzer will shut off but will be
activated automatically after about 8
minutes. You can repeat this process as
many times as necessary.
• While SNOOZE/SLEEP OFF function is
operating, the alarm indication flashes.
To Use Both Sleep Timer and Alarm
You can fall asleep to the radio and you will be
awakened by the CD, radio or buzzer alarm at
the preset time.
1.
Set the alarm. (See "Setting the Alarm".)
2.
Set the sleep timer. (See "Setting the
Sleep Timer".)
Setting the Sleep
Timer
You can enjoy falling asleep to the radio using the
alarm
built-in sleep timer that turns off the radio
automatically after a preset duration.
1.
Press RADIO/SLEEP repeatedly.
The radio turns on and the "On"
indication will appear initially in the
display. The radio will turn off
" indication flashes and
automatically after the selected preset
duration has elapsed.
Each time you press RADIO/SLEEP, the
duration changes as follows.
Radio on
90 min
(Sleep timer off)
Radio off
• To turn off the radio before the preset duration
has elapsed, press SNOOZE/SLEEP OFF.
Troubleshooting
Guide
Should any problem occur with the unit, make
the following checks to determine whether or not
/
alarm
servicing is required. If the problem persists,
consult the nearest Sony dealer.
The clock does not show the correct time.
• There was an electrical power interruption
" and
lasting for more than 1 minute.
" indication flash and ":"
The CD player does not operate.
• Did you place a disc correctly?
The disc should be placed with the labelled
surface up.
• Did you close the compartment lid completely?
• Dusty or defective disc—Clean the disc with an
optional cleaning cloth. Wipe the disc from the
center out.
Skipping of sound in CD operation
• Dusty or defective disc—Clean the disc.
• Dirty lens—Clean the lens with a commercially
available blower.
• Strong vibration
The CD, radio or buzzer alarm does not
activate at the preset time.
• Did you set the current time correctly?
• Did you set the alarm time correctly?
and
and
• Did you place a disc?
• Did you close the CD compartment lid
completely?
• Did you adjust the volume?
If the volume is turned down completely, the
CD or radio alarm is not heard.
/
/
"
LIMITED WARRANTY
"
60 min
30 min
15 min
Hide quick links:
Advertisement
