Advertisement
ALARM
RADIO BUZZER
OFF RADIO ON
CLOCK
H TIME SET M
Setting the Clock
1.
Plug in the unit.
"AM 12:00"will flash in the display.
2.
To set the hour, while holding down the
CLOCK button, press the TIME SET H
button. When the correct hour appears
in the display, release the CLOCK
button.
3.
To set the minute, while holding down
the CLOCK button, press the TIME SET
M button. When the correct minute
appears in the display, release the
CLOCK button. The clock will begin to
operate.
• Each press on the TIME SET H or TIME SET M
button advances the displayed number by one.
• The minute digits advance to "00" after "59".
The hour digits do not advance by pressing the
TIME SET M button.
• To adjust the time exactly to the second, release
the TIME SET M button simultaneously with the
radio or telephone time signal.
Playing the Radio
1.
Set the Function selector to RADIO ON
to turn on the radio and adjust
VOLUME.
2.
Select FM or AM and tune in a station
using the TUNING dial.
• To turn off the radio, set the Function selector to
OFF.
• To improve radio reception
FM: Extend the FM wire antenna fully to
improve reception.
AM: Rotate the unit horizontally for optimum
reception. A ferrite bar antenna is built into
the unit.
Setting the Alarm
To set the radio alarm, first tune in a station and
adjust the volume.
ALARM
SLEEP
SNOOZE/SLEEP OFF
FM wire antenna
AC power cord
AM
FM
BAND
VOLUME
TUNING
1.
To set the hour for alarm, while holding
down the ALARM button, press the
TIME SET H button. When the desired
hour appears in the display, release the
ALARM button.
2.
To set the minute for alarm, while
holding down the ALARM button, press
the TIME SET M button. When the
desired minute appears in the display,
release the ALARM button.
3.
Set the Function selector to RADIO or
BUZZER. The alarm will come on at the
preset time and automatically turn itself
off after 119 minutes.
• To shut off the alarm, set the Function selector
to OFF.
To sound the alarm at the preset time the next
day, set the Function selector to RADIO or
BUZZER again.
• To cancel either alarm, set the Function selector
to OFF.
• To doze a few more minutes, press SNOOZE/
SLEEP OFF.
The alarm will shut off, but will come on again
after about 9 minutes. You can repeat this
process as many times as you like.
• To adjust the radio alarm volume, turn
VOLUME. The buzzer volume is fixed.
• To listen to the radio continuously, set the
Function selector to RADIO ON.
• To check the preset time, press ALARM button.
Setting the Sleep
Timer
Enjoy falling asleep to the radio using the built-in
sleep timer that shuts off the radio automatically
at a preset time.
1.
While listening to the radio, set the
Function selector to OFF.
2.
Press SLEEP.
The radio turns on. It will go off after 59
minutes.
• To turn off the radio before the preset time,
press SNOOZE/SLEEP OFF.
• Every time you press SLEEP, the sleep timer is
reset to 59 minutes.
• When you set the Function selector to RADIO or
BUZZER, if the preset alarm time comes while
the sleep timer is operating, the radio or buzzer
sounds depending on which you set.
Advertisement
