Miele FN 35402 i Operating And Installation Instructions page 70

Installation
 Screw fixing bracket  into the pre-
drilled holes in the appliance door us-
ing hex screw .
 Secure a second pair of fixing brack-
ets  in the handle area of the door.
Use the pre-drilled holes in the appli-
ance door.
 Push the appliance into the building-
in niche: When pushing the appliance
into its niche make sure that the
mains cable does not get trapped.
Tip: To help you push it into position, tie
a piece of string around the plug to "in-
crease" the length of the connection
cable.
Then pull the cable by the end of the
string through the housing unit. It will
then be easier to connect once the ap-
pliance is in the unit.
70
With 16 mm thick unit walls:
 Clip spacers  and  on the right-
hand side of the hinges.
 Open the appliance door.