Undo the screws completely.
Fit the bracket on the opposite
side and loosely fit the screws .
Remove the screws completely
and loosely screw them in on the op-
posite side.
If you have put locking pins into the
hinges to stop the door opening too
far, remove the locking pins from the
top of the hinges.
To remove the soft-close mechanism
Warning. The soft-close mech-
anism snaps shut when dismantled.
Danger of injury.
Place the door with the outer side
downwards on a stable surface.
Remove the soft-close mechanism
from the ball joint.
Unscrew holder and remove the
soft-close mechanism .
Installation
65