Sony Ericsson V600 User Manual page 139

This is the Internet version of the user's guide. © Print only for private use.
To open code memo for the first time
1. } Organiser & Tools } Code memo. A message with instructions is displayed
} Continue.
2. Enter a four-digit passcode to open code memo } Continue.
3. Re-enter the new passcode to confirm.
4. Enter a checkword (maximum 15 characters) } Done. The checkword can consist
of both letters and numbers.
To add a new code
1. } Organiser & Tools } Code memo and enter your passcode } New code } Add.
2. Enter a name associated with the code, } Continue.
3. Enter the code } Done.
To change the passcode
1. } Organiser & Tools } Code memo and enter your passcode } More
} Change passcode.
2. Enter your new passcode } Continue.
3. Re-enter the new passcode } Continue.
4. Enter a checkword } Done.
Forgot your passcode?
If you forget your passcode, you must reset the code memo.
To reset code memo
1. Enter any passcode to access the code memo function. The checkword and codes
that are then shown are incorrect.
2. } Organiser & Tools } Code memo } More } Reset.
3. Reset code memo? is displayed } Yes. The code memo is reset and all entries are
cleared. The next time you enter the code memo, you must start by opening the code
memo for the first time.
139