Sony Ericsson T630 - Sony Ericsson T630 User Manual

To select a WAP profile
1. Scroll to Connect, WAP Options, WAP Profiles.
2. Select the profile you want to use.
You then return to the WAP Options menu and the
WAP profile is selected.
Using the WAP browser
To start browsing
Select either the top middle or top left icon on the
desktop. When the WAP page is loaded into the phone,
press and select from the following:
More
Open your home page at the top of the list, for example,
Sony Ericsson.
Go to one of your bookmarks. Select Bookmarks.
Enter the address of a WAP site. Select Enter Address,
to enter a new WAP address or select one of the 10
most recently entered addresses.
Tip: When you enter a WAP address, the normal
http:// prefix is not needed.
To exit WAP and disconnect
Press and scroll to Exit.
More
This is the Internet version of the user's guide. © Print only for private use.
Options when browsing
1. Select .
More
2. Select one of the following:
• Go to the home page set for the current profile.
• Add the site you are currently browsing to your
list of bookmarks, or see the list of bookmarks
for the current profile.
• Enter the WAP address of a site you want to visit.
• Save a picture from the site.
• Send a text message with a link to the current
WAP page to another phone.
• Send a link to the current site to another phone
via infrared or Bluetooth.
• Refresh the contents of the WAP page.
• Disconnect and go to standby.
• Display current status information: for example,
profile, access type, connection time, data rate,
security, address.
• Set the current site as the home page of the WAP
profile you are using.
• Push inbox for incoming messages via WAP.
Note: If you select an e-mail address when browsing
a WAP site, you can reply with a text message.
Using WAP 67