Sony Ericsson T300 User Manual page 42

WAP profile settings
The WAP settings are stored in a WAP profile. In most
cases you only need to use one profile to access the
Internet.
You set up and use additional WAP profiles, for
example, when accessing secure Internet sites, such as
a banking site or a corporate intranet. You then simply
switch between profiles when you need to change the
network connection.
Tip: If there are no data account or WAP profile
settings in your phone, you can enter data account
settings when you enter WAP profile settings. See WAP
services/Options/WAP profiles/Add profile?/Enter a
name/ Connect using:/Add account?/.
To enter WAP profile settings manually
1. Make sure you have a data account set up between
your phone and the Internet server, as described in
"Data account settings" on page 42.
2. Scroll to WAP services,
profiles, .
YES
3. Select Add profile? to add a new profile or select an
existing profile that you want to edit,
44 Setting up mobile Internet
, Options, , WAP
YES YES
.
YES
When selecting Add profile? enter a name for the
profile, , Connect using:,
YES
account to be used,
YES
A list appears. Scroll to Save?,
When selecting an existing profile, you can do the
following:
• Rename – Change the name of the profile.
• Connect using – Select data account.
• IP address – WAP gateway server address.
• Advanced – More profile settings, see below.
• Delete – Remove the profile.
If you select Advanced you can also do the following:
• Chg homepage – Enter the address of the WAP site
you want as the homepage.
• Second account – Select an alternative data account,
if the first in Connect using fails.
• User id – Enter your user id for the WAP gateway.
• Password – Enter your password for the WAP
gateway.
• Security – See WAP security settings.
• Show pictures – View pictures while browsing.
select the data
,
YES
and enter the IP address:,
.
YES
.
YES