Sony Ericsson T300 User Manual page 39

2. When the message arrives, New settings received.
Install? appears.
• Press to install the new settings
YES
Note: If settings already exist in your phone you can
either keep or replace them. See "Advanced setting
information" on page 41 for more information.
• Press to cancel installation. A new request for
NO
settings is then required, as in step 1.
3. After installation, see "Using mobile Internet" on
page 57.
Set up with the wizard
If your phone is not set up for WAP, you can ask your
network operator or service provider to provide you
with WAP settings information. Then you can simply
use the wizard in your phone to help guide you through
the relevant settings.
To use the wizard for setting up WAP
1. Scroll to WAP services,
Mobile Internet),
YES
WAP settings exist.
2. Enter and save settings when asked, press
confirm.
, homepage (for example
YES
. The wizard now starts if no
YES
Advanced setting information
To use the WAP browser, via a WAP service provider,
you need settings for:
• a specific data account for WAP, and a WAP profile.
To use e-mail messaging, via an Internet service
provider, you need settings for:
• a specific data account for e-mail, and an e-mail
account.
To send a text message (SMS) to an e-mail address via
your network operator, you need to set:
• an e-mail gateway phone number.
Note: Some advanced settings that are described in the
following texts are not necessarily mandatory, please
consult your network operator or service provider for
more information.
A data account includes connection settings for
access to a server at your service provider, for example
via WAP (Mobile Internet) or via e-mail (Internet).
to A WAP profile includes user settings that allow WAP
browsing and multimedia messaging.
Setting up mobile Internet 41