Performing The Initial Settings - Sony PEG-TG50 Intellisync Lite Operating Instructions Manual

Step 2: Performing the initial settings
The first time you turn on your CLIÉ handheld, you are required to make initial
settings. Follow the on-screen instructions to configure the initial settings and
to get accustomed to operations on your CLIÉ handheld.
1
Slide down the POWER/HOLD switch.
Your CLIÉ handheld turns on, and the following screen is displayed.
Slide down the POWER/HOLD
switch
Tip
If you cannot turn on your CLIÉ handheld
• Did you charge your CLIÉ handheld following the steps on page 11?
b
For details, refer to the supplied manual "Troubleshooting Q&A."
• If you cannot turn on your CLIÉ handheld even after charging it, perform a soft
reset (page 25).
2
Take out the stylus.
You can use the stylus to enter
data and to select applications.
14
b
Take out the Stylus