Download Print this page

Aiwa NSX-A959 Operating Instructions Manual page 3

Aiwa compact disc stereo system operating instructions nsx-a959

Advertisement

Available languages

Available languages

3
4
5
AC power cord
- When disconnecting the AC power cord, pull it out by the
AC power plug. Do not pull the cord itself.
- Never handle the AC power plug with wet hands, as this
could result in fire or shock.
- Power cords should be routed to avoid being severely bent,
pinched, or walked upon. Pay particular attention to the cord
from the unit to the power socket.
- Avoid overloading
AC power plugs and extension cords
beyond their capacity, as this could result in fire or shock.
Extension cord —To help prevent electric shock, do not use
a polarized AC power plug with an extension cord, receptacle,
or other outlet unless the polarized plug can be completely
inserted to prevent exposure of the blades of the plug.
When not in use — Unplug the AC power cord from the AC
power plug if the unit will not be used for several months or
more. When the cord is pk.rgged in, a small amount of current
continues to flow to the"un~~even when the power is turned
off.
~.
Outdoor
Antenna
.,
1 Power lines — When connecting an outdoor antenna, make
sure it is located away from power lines.
2 Outdoor antenna grounding
— Be sure the antenna system
is properly grounded to provide protection against unexpected
voltage surges or static electricity build-up. Article 810 of the
National Electrical Code, ANS1/NFPA 70, provides information
on proper grounding of the mast, supporting structure, and
the lead-in wire to the antenna discharge unit, as well as the
size of the grounding unit, connection to grounding terminals,
and requirements for grounding terminals themselves.
Antenna
Grounding
According
to the National
Electrical
Code
Ti-
~
ANTENNA LEAD IN WIRE
- ANTENNA DISCHARGE UNIT
(NEC SECTION 8?0-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810.21)
GROUND CLAMPS
, ~
POWER SERVICE GROUNDING
NEC-NATIONAL ELECTRICAL CODE
ELECTRODE SYSTEM
(NEC ART 250 PART H)
Maintenance
Clean
the unit only as recommended
in the Operating
Instructions.
Damaae Reauirina
Service
Have the units serviced by a qualified service technician if:
- The AC power cord or plug has been damaged
- Foreign objects or liquid have gotten inside the unit
- The unit has been exposed to rain or water
- The unit does not seem to operate normally
- The unit exhibits a marked change in performance
- The unit has been dropped, or the cabinet has been damaged
DO NOT ATTEMPT TO SERVICE THE UNIT YOURSELF.
Owner's
record
For your convenience,
record the model number and serial
number (you will find them on the rear of your set) in the space
provided below. Please refer to them when you contact your Aiwa
dealer in case of difficulty.
PRECAUTIONS ................................................................... 1
PREPARATIONS
CONNECTIONS .................................................................. 3
REMOTE CONTROL .........................m ................................. 4
BEFORE OPERATION ........................................................ 5
SOUND
RHYTHM PLAY FUNCTION-BEAT MASTER .................... 6
AUDIO ADJUSTMENTS
..................................................... 7
GRAPHIC EQUALIZER (GEQ) ........................................... 7
DSP SURROUND ................................................................ 8
RAD1O RECEPTION
MANUAL TUNING ............................................................. 10
PRESETTING STATIONS ................................................. 10
CD PLAYING
BASIC OPERATIONS ....................................................... 11
PROGRAMMED PLAY .....................m ................................l2
TAPE PLAYBACK
BASIC OPERATIONS ....................................................... 13
CONTINUOUS PLAY ........................................................ 14
RECORDING
BASIC RECORDING ......................................................... 15
m
DUBBING ATAPE MANUALLY ........................................ 16
DUBBING THE WHOLE TAPE .......................................... 16
Al EDIT RECORDING ....................................................... 17
PROGRAMMED EDIT RECORDING ................................ 18
KARAOKE
MICROPHONE MIXING .................................................... 19
KARAOKE PROGRAM ..................................................... 20
CLOCK AND TIMER
SETTING THE CLOCK ...................................................... 21
SETTING THE SLEEP TIMER .......................................... 21
SETTING THE TIMER ....................................................... 22
OTHER CONNECTIONS
CONNECTING OPTIONAL EQUIPMENT ........................ 23
LISTENING TO EXTERNAL SOURCES .......................... 23
GENERAL
CARE AND MAINTENANCE ............................................ 24
TROUBLESHOOTING
GUIDE .......................................... 24
SPECIFICATIONS ............................................................. 25
PARTS INDEX ....................................................
Back cover
I Model No.
I Serial No. (Lot No.)
I
I CX-NA959 u
I
I
SX-WNA958
ENGLISH
2

Advertisement

loading

This manual is also suitable for:

Cx-na959 uSx-wna958