Aiwa NSX-A959 Operating Instructions Manual page 13

m
While
the disc compartment is opened with DISC CHANGE,
do not press buttons other than DISC CHANGE or A OPEN/
CLOSE. Doing so may cause malfunctions. In this case, reset
the unit referring "TO reset" on page 24.
When loading an 8-cm (3-inch) disc, make sure to put it onto
the inner circle of the tray precisely. Otherwise, the disc may
be damaged or the disc compartment will not open. If it does
not open, please consult your Aiwa dealer for repair.
Do not place more than one compact disc on one disc tray.
* Do not tilt the unit with discs loaded. Doing so may cause
malfunctions.
e When transporting the unit, remove the discs from the trays.
When replacing the discs during play, do not replace discs other
than those facing you.
If you place a disc on the empty right inner tray, and then press
A OPEN/CLOSE, "ERROR" is displayed and the disc
compartment may not close. Remove the disc on that tray.
Never place here.
Use the remote control.
RANDOM play
All the tracks on the selected disc or on all the discs can be
played randomly.
REPEAT play
A single disc or all the discs can be played repeatedly
Press RANDOM/REPEAT.
Each time it is pressed, the function can be selected cyclically.
RANDOM play —
RANDOM lights
up on the display.
REPEAT play — = lights upon the display.
RANDOM/REPEAT play — RANDOM and G light up on
the display
Cancel — RANDOM and - disappear from the display.
To play all discs, press 4> to start play.
To play a single disc, press DISC DIRECT PLAY, then press
one of the numbered buttons 1-5 within 3 seconds to start play.
m
During random play it is not possible to skip to the previously
played track with the ++.
Up to 30 tracks can be programmed from any of the inserted
disc.
1
2
2,3
+, w
5
9
Lh>ethe remote control.
1
2
3
Press PRGM twice
in
stop mode.
PRGM indicator lights up on the display.
PRGM
When PRGM is pressed once in step 1, the unit enters
KARAOKE PROGRAM (page 20).
Press DISC DIRECT PLAY, then press one of the
numbered buttons 1-5 within 3 seconds to select
a disc.
Go to the next step when the tray stops rotating.
Press the numbered buttons O-9 and +10 to
program a track.
Example:
To select the 25th track, press +10, +10 and 5.
To select the 10th track, press +1 O and O.
Selected
Total number of
track number selected tracks
Program
Total pla~ing time of
number the selected tracks
4 Repeat steps 2 and 3 to program other tracks.
5 Press 4> to start play.
T~ check the Drociram
Each time +-or - is pressed in stop mode, a disc number,
track number, and program number will be displayed.
Tb clear the program
Press CLEAR in stop mode.
To add tracks to the program
Repeat steps 2 and 3 in stop mode. The track will be programmed
after the last track.
To change the programmed tracks
Clear the program and repeat all the steps again.
To play the programmed tracks repeatedly
After programming the tracks, press RANDOM/REPEAT
repeatedly until - appears on the display.
[m
~uring programmed play, you cannot perform random
play,
checking the remaining time, and selecting a disc or track.
ENGLISH I
2