Casio V-REGI series Programming And Reference Manual page 84

Scanning PLU start No.
Scanning PLU end No.
Service change2 rate
Service change2 end time
Service change2 start time
Service charge rate.
Sign On Screen automatic display.
Sign On Screen style.
Sign On password for iButton.
Start Cash register when Android
OS has started.
Stock check when registering.
Store Z data to SD card.(Reserved)
Store code
78
Starting number of automatic learning scanning PLU
item code. Set within the rage of 000001 to 200000.
Ending number of automatic learning scanning PLU
item code. Set within the rage of 000001 to 200000.
Sets rate of service charge 2 which is applied between
certain start to end times. Set zero if service charge 2
is not applied.
Sets end time of service charge 2. Set 00:00 if service
charge 2 is not applied.
Sets start time of service charge 2. Set 00:00 if
service charge 2 is not applied.
Sets service charge rate. Set zero if service charge is
not used.
Chooses to show clerk selection screen automatically
at signing off.
0: Yes
1: No
Chooses sign on screen style.
0: Key style
1: Clerk ID (number) system
When iButton is used, it chooses whether to use
password of sign on clerk. Ineffective if iButton device is
not connected
0: Password not necessary
1: Password necessary
Selects whether to start sales management system
automatically or not.
0: Yes
1: No
Selects whether to check stock at item registration or
not.
0: No (No checking)
1: Error when out of stock (Check the stock)
2: Warning when stock running short
(Check the minimum stock)
3: Use both check
If you select "1" or "3", items which are out of stock
cannot be registered.
Usage of SD card at Z operation.
0: Us an SD card, 1: SD card not
Set store code maximum 6 digits, if necessary.
Sales database logs at TERMINALNUMBER as store code
6digits and terminal number 2 digits.